IMS-02A Three in One Low Speed and Indicator Trigger Module

IMS-02A   Low Speed and Indicator Trigger Module 

IMS-02A is an enhanced three-in-one trigger module with speed, indicator, and an independent speed output, offering more flexibility for safety device integration.

Operation：

The module may be operated in three modes:

1. Speed signal PLUS indicator dependent (default):

The LH/RH outputs will only be activated the vehicle is below the desired cut-out speed and indicator are on. ' Speed control OFF' cannot be selected for this mode to operate ( i.e. All switches are 1,2 & 3 OFF, switch 4 ON).

Applications: Side Obstacle Detection System, Side Warning Alarm

2. Indicator dependent ONLY:

If ‘Speed Control Off’ is selected, the outputs will be activated with respect to the state of the indicators only. This mode is selected by setting all 4 dip switches to OFF position. 

Application: Side Camera

3. Speed dependent ONLY:

Connect the device to PINK wire. It will give voltage once the speed below threshold setting, with no effect from indications.

Applications: Front Obstacle Detection System, Corner Obstacle Detection System

Features

• 3 operating modes: speed + indicator / indicator only / independent speed
  
• 7 selectable thresholds (0–40 mph) with cut-in/cut-out speeds
  
• Higher current capacity (3A)
  
• Independent speed output (pink wire)
  
• Outputs disabled with hazard lights
  

Specifications